- ISO 9001 Certified · Global Engineering Since 1980
SMSP Hammer Mill
High-efficiency hammer mill for fine grinding of feed raw materials and biomass, in two series covering 2 to 35 t/h.
- 2–35 t/h
- SMSP series
- Installation & spares
30–220 kW
Motor power
2–35 t/h
Grinding capacity
30–220 kW
Motor power
1,480 rpm
Main shaft speed
Ø1–5 mm
Screen holes
Working Principle
Material enters the grinding chamber from the feeder on top. Hammers on the rotor, turning at 1,480 rpm, strike the material against the chamber until the particles are small enough to pass through the screen. The screen hole size — from 1 mm to 5 mm — sets the final particle size.
Key features
- High-efficiency fine grinding
- Two series: SMSP965 and SMSP600
- Capacity from 2 to 35 t/h
- Screens from Ø1 mm to Ø5 mm
- Main shaft speed 1,480 rpm
- For feed and biomass grinding
Technical Data
Figures from the SEMZON catalogue. Our engineers confirm the final model for your product and capacity.
| Model | Main shaft speed (rpm) | Power (kW) | Capacity (t/h) |
|---|---|---|---|
| SMSP965×400 | 1480 | 55 / 75 | 5–10 |
| SMSP965×500 | 1480 | 90 / 110 | 8–12 |
| SMSP965×600 | 1480 | 132 / 160 | 15–20 |
| SMSP965×800 | 1480 | 200 / 220 | 20–35 |
Valid for corn with moisture ≤12%, density ≥0.72 t/m³, a 3 mm screen and a hole-opening rate of at least 33%.
| Model | Main shaft speed (rpm) | Power (kW) | Capacity (t/h) |
|---|---|---|---|
| SMSP600×380 | 1480 | 30 / 37 | 2–4 |
| SMSP600×450 | 1480 | 45 / 55 | 3–6 |
| SMSP600×500 | 1480 | 55 / 75 | 5–8 |
| SMSP600×600 | 1480 | 75 / 90 / 110 | 8–12 |
Where It Is Used
Wood pellet plants that turn sawdust and crop residue into fuel.
Often Used Together
Light, big & small impurities · Dust, stones & ferrous particles
Common
Questions
Straight answers to the questions our engineers hear most about the SMSP Hammer Mill.
Still have questions?
Talk directly with our engineering team for a tailored consultation.
What is the price of a hammer mill in Pakistan?
It depends on the series and model (SMSP600×380 to SMSP965×800), motor power and feeder. Tell us your material and the tons per hour you need and we will recommend and quote the right model.
What particle size can it produce?
Particle size is set by the screen. 1–1.5 mm screens give fine grinding for pellet and aqua feed; 3–5 mm screens give coarser grinding for mash feed and biomass with higher throughput.
Can it grind biomass?
Yes. The SMSP hammer mill is used in feed and biomass plants. Logs and branches are chipped first, and capacity on wood is lower than on corn.
- Start Your Project
Let’s Build Your Industrial Solution
Tell us about your capacity, raw material and site. Our engineering team will design a custom turnkey solution tailored to your exact requirements and budget.